How to Get Beach Waves in 5 Simple Steps
Upload time :January 8, 2024
Shares
Reads
If you're looking for an effortless, beachy look that's perfect for summer, try getting beach waves in just five simple steps. First, prep your hair with sea salt spray to add texture and hold. Then, use a curling iron to create loose waves on sections of your hair, making sure not to curl from the roots. After curling, finger comb your hair instead of using a brush to avoid flattening the curls. Finish with a light hairspray to hold the waves in place. For a more natural look, consider braiding your hair overnight instead of using a curling iron. This will give you a slightly messier, more relaxed wave pattern. Finally, it's important to avoid brushing or flattening your curls in order to keep them looking fresh and bouncy all day long. With these easy steps, you can achieve beautiful beach waves that are perfect for any occasion.
1. Prep hair with sea salt spray.
Step 1: Prep hair with sea salt spray
The first step in achieving beach waves is preparing your hair with a good quality sea salt spray. This product is essential as it mimics the texture and volume that comes naturally from being at the beach. It’s a great way to give your hair some extra body and a tousled look without using any heat.
To apply sea salt spray, start by washing your hair and towel-drying it. Then, divide your hair into sections and spray a small amount of the product onto each section, focusing on the mid-lengths and ends. Use your fingers to scrunch and twist your hair, allowing the sea salt spray to work its magic. Leave your hair to air dry or use a diffuser attachment on your blow dryer to speed up the process.
Step 2: Choose the right tools
Once your hair has dried, it’s time to choose the right tools. A curling iron or wand is ideal for creating beach waves, but you can also use a flat iron if that’s what you have on hand. Just make sure it has rounded edges to avoid creating sharp bends in your hair.
If you’re using a curling iron or wand, opt for a barrel size between 1-2 inches. This will create loose, natural-looking waves rather than tight curls. For a more relaxed look, choose a larger barrel size; for tighter waves, go for a smaller one.
Step 3: Section your hair
To ensure you get even waves throughout your hair, it’s important to section it properly. Start by dividing your hair in half, from ear to ear, and secure the top section with a clip or hair tie. Then, divide the bottom section into two or three parts, depending on the thickness of your hair.
Take a small section of hair and wrap it around the curling iron or wand, holding it in place for 5-10 seconds before releasing. To create a more natural wave pattern, alternate the direction you’re wrapping your hair (one section towards your face, the next section away from your face).
Repeat this process until all sections of your hair have been curled.
Step 4: Define your waves
After curling all sections of your hair, it’s time to define your waves. Using your fingers, gently comb through your hair to separate the curls and create a more natural, beachy look. You can also use a wide-tooth comb or a brush with soft bristles to avoid disrupting the waves too much.
For added definition, use a texturizing spray or a lightweight hairspray to hold the waves in place. Avoid using heavy products that could weigh down your hair and make it look greasy or stiff.
Step 5: Finish with a mist of salt spray
To complete your beachy look, finish off with a mist of sea salt spray. This will add texture and volume to your waves, giving them a fresh-from-the-beach vibe. Hold the bottle about 6 inches away from your head and lightly mist over your hair.
If you prefer a shiny finish, you can also add a few drops of hair oil to your palms and run them through your hair, starting from the mid-lengths to the ends.
2. Use curling iron on sections of hair.
Step 1: Prepare your hair
Before you start curling your hair, it's important to prepare it properly. Start by washing your hair with a volumizing shampoo and conditioner to give it some body and texture. Towel dry your hair gently, then apply a heat protectant product to prevent damage from the curling iron. A texture spray or sea salt spray can also help to create the desired effect.
Step 2: Divide your hair into sections
Next, divide your hair into sections using clips or hair ties. This will make it easier to work with and ensure that you don't miss any pieces. You may want to start at the bottom and work your way up, or begin at the crown of your head and move downward. Experiment with different section sizes to find what works best for you.
Step 3: Use the curling iron
Once you have your sections ready, it's time to use the curling iron. Choose a wand or barrel size that suits your hair length and desired wave size. If you have shorter hair, a smaller barrel may be more appropriate. For longer locks, a larger barrel can create loose waves. Hold the curling iron vertically and wrap a section of hair around it, starting at the base and working your way down to the ends. Hold for about 5-10 seconds, depending on your hair type and thickness, then release.
Step 4: Repeat on all sections
Continue wrapping sections of hair around the curling iron until you have curled all of your hair. Remember to alternate the direction of the curls for a more natural look. If you prefer tighter waves, use smaller sections and hold for a longer period of time. Once you're done, let your hair cool for a few minutes before touching it to allow the curls to set.
Step 5: Finish with hairspray
The final step is to add hairspray to hold your beach waves in place. Choose a flexible hold hairspray that won't make your hair stiff or crunchy. Spray evenly over your hair, holding the can about 12 inches away. You can also use a texturizing or finishing spray to enhance the tousled, beachy look.
3. Finger comb and finish with hairspray.
Step 1: Start with clean hair
The first step to getting beach waves is to start with clean hair. This will help your hair hold the style better and prevent any unwanted frizz or flyaways. Use a gentle, sulfate-free shampoo to cleanse your hair and follow up with a nourishing conditioner to keep your strands hydrated. Once you've rinsed out your conditioner, gently towel-dry your hair to remove any excess water.
Step 2: Apply a heat protectant and styling product
Before you start styling your hair, it's essential to apply a heat protectant to prevent damage from hot tools. Choose a lightweight spray or serum that will add moisture and protection to your hair without weighing it down. Once you've applied your heat protectant, use a styling product such as a mousse or sea salt spray to add texture and hold to your hair. Apply the product evenly throughout your strands, starting at the roots and working your way down to the ends.
Step 3: Finger comb and finish with hairspray
Once you've applied your styling product, it's time to create those beachy waves. Start by dividing your hair into two sections: top and bottom. Take one-inch sections of hair and wrap them around a curling iron, holding for a few seconds before releasing. Do this all around your head, alternating the direction of the curls to create a more natural look. After you've finished curling your entire head, use your fingers to gently comb through your hair, separating the curls and creating a tousled, beachy texture. Finish off with a light mist of hairspray to hold your waves in place.
Tips for achieving the perfect beach waves
- Experiment with different curling iron sizes to find the one that works best for your hair type and length. A larger barrel size will create looser waves, while a smaller size will create tighter curls.
- Don't worry about making your waves too perfect - beach waves are meant to be undone and effortless, so don't stress if they're not uniform.
- Use a wide-tooth comb or detangling brush to gently comb through your hair after applying your styling product. This will help distribute the product evenly and prevent any clumps or buildup.
- If you have thick or coarse hair, consider using a flat iron instead of a curling iron to create your waves. Simply twist your hair around the flat iron and pull downwards to achieve a similar effect.
- To enhance your beach waves even further, try adding some highlights or lowlights to your hair. This will create dimension and depth, making your waves stand out even more.
4. Optional: braid hair overnight for natural waves.
Not only is this method simple and easy to do, but it also avoids the need for heat styling tools that can damage your hair over time. Plus, it's a great way to enhance your natural texture and create a beautiful, tousled look that's perfect for any occasion.
So, if you're interested in learning how to get beach waves by braiding your hair overnight, here are some simple steps to follow:
Step 1: Start with clean, damp hair
Before you begin braiding your hair, you'll want to make sure it's clean and slightly damp. This will help the waves to set more easily while preventing frizz and flyaways. You can either wash your hair in the evening and let it air dry or lightly mist it with water before braiding.
Step 2: Apply a styling product
To help hold the waves in place and add extra texture, you may want to apply a styling product to your hair before braiding. A sea salt spray or texturizing spray will work well for this purpose. Simply spritz it evenly throughout your strands, then comb through to distribute it evenly.
Step 3: Divide your hair into sections
Next, separate your hair into several sections. The number of sections you create will depend on how thick your hair is and how loose or tight you want your waves to be. Generally, four to eight sections will work well for most hair types.
Step 4: Braid each section of hair
Starting at the roots, braid each section of hair tightly all the way down to the ends. You can use a traditional three-strand braid or experiment with different braiding techniques, such as fishtail or Dutch braids, to create different patterns and textures. Once you've finished braiding each section, secure the ends with a small elastic band.
Step 5: Sleep on it!
Now it's time to let your hair work its magic while you sleep. Slip a silk scarf or bonnet over your head to protect your hair and prevent frizz, then hit the hay. When you wake up in the morning, gently unravel each braid to reveal your beautiful, natural-looking waves.
Optional Step: Add finishing touches
If you want to enhance your waves even further, you can add some finishing touches once you've undone the braids. Use your fingers to gently separate the waves and create more volume, then spritz on some more texturizing spray or sea salt spray to help hold the style in place. You can also use a curling iron or wand to touch up any areas that need a little extra definition.
5. Avoid brushing or flattening curls for long-lasting waves.
Step 1: Prepare Your Hair
The first step to getting beach waves is to prepare your hair properly. Start by washing your hair with a clarifying shampoo to remove any build-up or residue from previous styling products. Then, apply a leave-in conditioner to help protect your hair from heat damage and keep it moisturized. Once you have applied your leave-in conditioner, comb your hair through with a wide-tooth comb to detangle any knots and distribute the product evenly.
Step 2: Apply Heat Protectant
Before you start applying any heat to your hair, it's crucial to apply a heat protectant. This will help prevent damage and keep your hair healthy. Spray your heat protectant generously throughout your hair, making sure to coat each strand from root to tip. Once you have applied your heat protectant, give it a few minutes to settle into your hair before moving on to the next step.
Step 3: Create Your Curls
Now it's time to create your curls. You can use a curling iron, curling wand, or even a straightener to achieve beachy waves. If you're using a curling iron or wand, take small sections of your hair and wrap them around the barrel, leaving the ends out. Hold the hair in place for a few seconds before releasing and moving on to the next section. If you're using a straightener, clamp each section of hair at the roots and then twist the straightener away from your face as you glide down the length of the hair, creating a curl.
Step 4: Texturize Your Waves
Once you have created your curls, it's time to give them that beachy texture. Take a texturizing spray or sea salt spray and mist it over your hair, scrunching it up with your hands as you go. This will break up the curls and give them that messy, effortless look. If you find that your curls are too tight, you can also use a paddle brush to gently loosen them up.
Step 5: Avoid Brushing or Flattening Curls for Long-Lasting Waves
Finally, one of the most important steps to getting long-lasting beach waves is to avoid brushing or flattening your curls. This can cause your waves to fall out or become frizzy. Instead, use your fingers to separate and tousle your curls, or use a wide-tooth comb to gently detangle any knots. If you need to touch up your waves throughout the day, use a bit of texturizing spray or sea salt spray to revive them.
In conclusion, getting beach waves doesn't have to be complicated. By following these five simple steps, you can achieve gorgeous, effortless waves in just a few minutes. Remember to prepare your hair properly, apply a heat protectant, create your curls, texturize your waves, and avoid brushing or flattening your curls for long-lasting results. With these tips, you'll be able to rock that perfect summer hairstyle all season long.
Buy Now
See More: Wholesale Products
Recommended related content
How to Make Fairy Wands at Home in Just a Few Easy Steps!
How to make a Mask Michael Myers costume in 5 easy steps?
How to safely clean up broken glass in 10 easy steps
